Buy Saeyang battery cutter K-38/SH30N wholesale and retail in ubeauty.pro store

Electronic conciseness and aesthetics of mobility.

In such a creative and competitive type of activity as the Nail industry, it will take a lot of work to achieve the status of a sought-after master. If you succeed, you gain such benefits as respect, prestigious and satisfied clients, and a good level of material well-being.

Of course, many beginners on the way to achieving these goals make a lot of common mistakes that beginners make. And one of the main reasons why they fail and sometimes lose a lot of time until they understand the mistake is that they choose cheap fakes, often of very dubious quality, as their main working tool. These devices are equipped with the same low-quality handles that vibrate, make noise and heat up during operation, and some malfunctions constantly occur in them, up to a complete failure. And you will agree: even if you have a good level of training, not a single client will become your regular and, no doubt, will not respect the master, who constantly has something going wrong.

The solution is obvious: in order not to lose customers, but to have their recognition, and just respect yourself, you need to have such a device "in service" that will be obviously reliable, powerful and trouble-free, plus it will not make noise and scare away customers. And Saeyang has several of these excellent devices that will set you apart from your competitors. One such device is the Saeyang K-38/SH30N.

This versatile, mobile, battery-powered kit is suitable for any skill level. To date, he is considered one of the most sought after among those masters of the Nail industry who often prefer to work on the road to the client. The dimensions of this K-38 control unit are only 67x128x30 mm, and the weight is 277 g. But despite its miniature dimensions, it can, of course, be used in the cabin as a stationary one.

Somewhat unusual design of the body of this unit will undoubtedly attract the attention of customers, since it rather looks like a small Power-Bank with a round wheel of a smooth speed controller on the top panel. Its undoubted advantage is the presence of a microprocessor that saves the device from overloads: first, if a problem occurs, the system beeps, and then automatically turns off the device. On the right side of the control unit there is an on/off button for the device and a connector for installing a vertical pen holder. On the left side, there are buttons for switching rotation to reverse and a button for switching control "hand / pedal". The connector for connecting the pedal is located below (the pedal is purchased separately).

On the front of the case there is a display showing the number of rpm (1:1000) and symbols for all functions (reverse, pedal, overload). Usually, the function symbols are not visible on the display, they are illuminated by LEDs when a particular function is turned on. Also on the front of the case there is a connector for connecting a micromotor handle and a battery charge indicator. A high-quality lithium-ion battery charges in just 3 hours, and then allows the device to work autonomously from 4 to 8 hours continuously (depending on the selected load mode). The power is 24 W.

Extremely elegant and miniature, but very powerful, the SDE-SH30N micromotor handle is made taking into account the wishes of nail technicians and meets all modern safety and hygiene requirements. The length of the handle is 129 mm, and the weight is only 160 g. Its plastic, steel-colored, back part has a circular technical hole that contributes to the forced cooling of the micromotor by blowing the body during operation. The power of the micromotor is more than enough for both manicure and pedicure procedures with a torque of 2.9 N cm. And the modern components installed in the handle make it possible to reach a maximum speed of up to 30,000 rpm. The handle has a Twist-Lock collet for quick change of attachments.

For even more convenience, the handle is perfectly balanced, and its front part, where it is held by the fingers, has a diameter of less than 16 mm and is made of metal, which is undoubtedly adds elegance to it. But this technical distinction has another purpose: high-speed bearings that hold the collet spindle completely eliminate vibration and radial runout on the shaft, and contribute to its quiet operation. But the bearings, of course, heat up a little, and the presence of a metal surface of the housing allows you to increase heat transfer, thereby increasing their service life.

The minimum dimensions and significant endurance of this kit are designed for professional work in the salon and on the road. He makes pedicure and manicure procedures a pleasure not only for the client, but, of course, for the master himself.