Buy Saeyang Marathon Escort 2 Pro/SH20N milling machine without pedal wholesale and retail in ubeauty.pro store
- Stock: 97
- Brand: Saeyang
- SKU: 1490
Parameters
Devices for manicure and pedicure | |
Appointment | Universal |
Built-in vacuum cleaner | No |
Complete set of nozzles | No |
Country of origin | South Korea |
Guarantee | 24 months |
Maximum rotation speed | 30000 |
Motor cooling | Yes |
Pedal configuration | No |
Power | 45 watts |
Reverse | Yes |
The original | Yes |
Torque, N | 2.7 N/cm |
Type of product | For manicure/pedicure |
Warranty on the handle | 12 months |
Number of revolutions (rpm) | 0-30000 |
The choice of a universal device for professional manicure / pedicure and nail correction is far from an easy task. Especially if you are not a pro and making a mistake in such a responsible choice will be both offensive and expensive for you.
Where to go, where to find out? There is a short and simple answer - you need to see everything with your own eyes. After all, it's not difficult: go to a dozen salons, supposedly for a procedure, and meanwhile see what milling cutters are used there and find out the prices for them. And then you will see for yourself that the most recognizable and widespread devices are either Marathon or similar South Korean devices. In addition, any master with experience will say that it is better to buy a good and high-quality device right away.
And one of the most reliable, high-quality and durable devices for manicure and pedicure is the Marathon Escort 2 Pro with a micromotor handle SH20N. And due to the low price, this kit is also the most popular.
In this configuration, this control unit, manufactured by the South Korean company Saeyang, is equipped with a miniature SH20N handle designed specifically for manicure / pedicure.
< p> Also, one of the most common and recognized among professionals in the Nail industry is the Marathon Champion 3 control unit. But unlike it, the Escort 2 Pro has increased power and a double transistor circuit, which allows the handle to perform more complex procedures without much effort. It is also equipped with an electronic overload protection system, which, if there is an increased load on the handle, will signal you with an LED installed on the front of the unit. If you do not react or notice this, the microprocessor itself will turn off the handle after a few seconds. After that, you can turn on the device again and continue working.In addition to the overload LED, the front side has a speed controller, an on / off button, a toggle switch for switching reverse and a connector for connecting a micromotor handle to it. On the rear panel, the unit has a fuse socket, a connector for connecting a pedal and a toggle switch for switching the hand / pedal control. On the top of the block, like all Marathons, there are holes for installing cutters, and on the side it is possible to attach a holder for a pen.
The SH20N micromotor pen included in the kit is one of the most popular models, which, for for many years of release, it has proven itself in the best way among nail service masters. It has a plastic case and a thin metal (diameter 16 mm) front part, which makes it as comfortable as possible for a small female hand.
The metal spindle housing makes it possible to increase the heat exchange of the bearings heated during operation with the environment . It also allows you to significantly increase the resource wear of the bearings and, as a result, the micromotor handle itself. After all, it is thanks to the excellent work of the bearings that this micromotor has the ability to maximize its speed up to 30,000 rpm. By the way, the power of the micromotor is 45 W, and the torque is 2.7 N cm.
And the complete absence of vibration and very quiet operation of the handle will turn the work for the master, and the manicure procedure for his client, into natural pleasure.
The handle also has a standard "Twist-Lock" cutter clip that allows you to change nozzles in 1-2 seconds. And in the back of the case there are special technical holes, thanks to which the impeller additionally creates air flows along the case. This contributes to the cooling of the micromotor itself.
This kit combines the advantages of all Saeyang devices: reliability, power and ease of use.
Food | |
---|---|
Power | Network |
Voltage (V) | 230 |
Number of revolutions (rpm) | 30000 |
Clamping shank diameter (mm) | 2.35 |
Torque (Ncm) | 2.7 |
Weight handles(r) | 146 |
Weight (kg) | 1.25 |
Power (W) td> | 45 |
Complete set | Marathon Escort 2 Pro block Handle SH20N Handle holder Carbon brushes - 1 pair Key for pen |
Warranty | Per block - 24 months Handle - 12 months |
Producing country | South Korea |
Devices for manicure and pedicure | |
Appointment | Universal |
Built-in vacuum cleaner | No |
Complete set of nozzles | No |
Country of origin | South Korea |
Guarantee | 24 months |
Maximum rotation speed | 30000 |
Motor cooling | Yes |
Pedal configuration | No |
Power | 45 watts |
Reverse | Yes |
The original | Yes |
Torque, N | 2.7 N/cm |
Type of product | For manicure/pedicure |
Warranty on the handle | 12 months |
Number of revolutions (rpm) | 0-30000 |