Buy Saeyang Krafit Ki-20 Advance LED physiotherapy dispenser wholesale and retail in ubeauty.pro store

At some point in their practice, every modern implant dentist decides to improve his operating room in order to make his workflow even more professional, efficient and convenient by modernizing it. Following his personal concept of development, he is well aware that no operating room can be ideally completed without the obligatory presence of the highest quality surgical apparatus No. 1 in the operating room - the physiodispenser.

This device is one one of the indispensable conditions for successful and productive work, because it is necessary for such dental interventions as maxillofacial microsurgery, stoma-implantology, bone surgery of small bones (implantation surgery) and endodontics.

And one of such devices, which you should pay your attention to first of all (strive for the best!), will undoubtedly be a first-class, high-quality, most utilitarian, convenient and extremely reliable Krafit KI-20 Advance LED physiodispenser. It is designed with the latest, improved in accordance with the highest world standards, technologies from Saeyang. After all, performing any type of complexity of stoma operations with this almost flawless device, which combines all the ideal qualities of modern physiodispensers, will always be undoubtedly ideal.

And the presence of illumination in the tip of the pen will allow you to perform procedures with higher accuracy.

And to a greater extent, Krafit KI-20 Advance LED acquired all these qualities thanks to the knowledge based on experience, impeccable professionalism and the highest qualification of engineers of the South Korean company Saeyang, which since its foundation in 1976 has specialized and specializes in the production precisely high-precision dental equipment, micromotors, medical stoma-devices and their accessories. And today, Saeyang is one of the world leaders in this field.

The control unit of the Krafit KI-20 Advance LED physiodispenser has a large (292x230x104 mm) white plastic case, and is highly efficient, functioning under the control of a microprocessor device armed with an automatic system of protection against overheating and overload. It also features a built-in mini peristaltic pump that delivers sterile saline to the handpiece when needed, which in turn has two independent cooling systems for the bur and the handpiece.

There is a very large LCD on the front of the unit - a display with a convenient menu that displays all the necessary information with intuitive symbols and numerical values. This is very convenient during operations, as it will provide ease of use and enable the doctor to concentrate on the most important thing.

All data displayed on the display can be pre-set and also changed during operation using membrane buttons located next to the display. It is these buttons that program and control the device.

The PROGRAM buttons, for example, switch between preset programs, which, after setting various protocols, numerical values and ordering them, you will save in the device's memory by pressing and holding (up to signal) of the memory settings button - "MEMORY".

For the programming itself, it will be enough for you to spend only a couple of minutes before starting work to set and save the required parameters in the device's memory for any of the 9 separately configurable memory modes .

If we talk about other advantages of the device, then you need to start with the "CAL" button (calibration function), which helps to see the technical condition of any handpiece before each use. When pressed, a three-stage procedure is performed:

1. after inserting a special calibration bur into the tip, the first press performs the calibration of the torque (torque) without load,

< li>

Second click performs a load test. To do this, the same drill installed in the handle must be inserted into the hole on the top of the apparatus and again press "CAL",

2. the third is the speed calibration. You need to remove the drill and press "CAL" again.

Wait for the completion of each of the stages until the signal, and after the end of the procedure, the word "Done" (Done) will appear on the display.< /p>

The rest of the buttons adjust such indicators and control such processes as:

• using the "LIGHT" button you adjust two levels of backlighting and its absence,

• The "COOLANT" button controls the amount of saline and controls the irrigation of the pump, having five levels - up to a maximum of 90 ml / min,

• The "FWD / REV" switches the direction of rotation of the bur / nozzle,

• the "GEAR" button is responsible for setting the gear ratio on the handpiece, which is selected directly for a particular procedure and is set (mandatory) in each program . So, by using handpieces with different gear ratios, you can significantly expand the functionality of using a physiodispenser - from implantology and microsurgery to endodontics.

Using the "SPEED" buttons, you can set the necessary numerical values, respectively, speeds from 10 to 2000 rpm at a gear ratio of the handpiece 20:1 (included in the package), from 13 to 1200 rpm at a ratio of 32:1, etc.

A the TORQUE buttons adjust the torque ratio up to 70 Ncm at a gear ratio of 20:1 and up to 90 Ncm at a ratio of 32:1. The setting is performed with the visualization (columns) of the torque diagram on the display in real time.

But the "USB" button is necessary to write the parameters of the digital values of the programs to USB-drives so that they can be printed or stored. The USB connector is located on the front of the device.

The Saeyang KI-MTO brushless, very light and compact micromotor in a stainless steel case deserves special attention. With a peak power of 120 W and a maximum torque of up to 90 Ncm, it is guaranteed to operate smoothly and almost silently. Originally engineered by Saeyang engineers, when combined with both straight and contra-angle handpieces that comply with ISO 3964 (DIN 13940), the device provides a perfect balance for all procedures and techniques included in the protocols of stomy-implantology and surgery. And thanks to the use of the highest quality components in the assembly, it will certainly serve you for a very long time, and, being brushless, absolutely does not need maintenance.

A constructive and basic advantage in this configuration is also an autoclavable, optical, reduction reducing contra-angle handpiece KI-AG20 (20:1) equipped with push-button burr clamp. Using it together with the KI-MTO micromotor will provide the device with a clear performance of all the characteristics described above.

The physiodispenser can also be controlled using a universal foot pedal, which gives the doctor's hands complete freedom during operation, and its four large pedals are responsible for control over the main functions: program selection, speed, volume of saline and switching to reverse.